Advance® Vented and Non-Vented Caps meet all applicable requirements for a Type I (top impact) helmet as outlined in ANSI/ISEA Z89.1-2009: Vented (Class C) and Non-Vented (Class E)

Advance Caps also meet the ANSI/ISEA Z89.1-2009 voluntary standard for reverse donning.

WARNING: Do not mix suspension and helmet sizes. Make sure the sizes match (i.e., standard-size suspension with standard-size helmet). Use only MSA suspensions on an MSA helmet. Failure to comply with the above will reduce the energy-absorbing ability of the protective helmet, which can result in serious injury or death.

Agriculture
Asbestos Abatement
Chemical
Construction
Domestic Preparedness
Hazardous Materials
Indoor Air Quality
Medical
Mining
Nuclear
Oil & Gas
Paper & Pulp
Sand Blasting
Sanding & Grinding
Spray Painting
Water/Wastewater
Welding

Confined Space
Overhead Falling Objects
Splash
Welding

Product Information

Feature cooling vents along the crown for improved air circulation, a lightweight design for added comfort, lateral contours above the ear for easy integration of hearing protection, an optional four- or six-point ratchet suspension system with a soft, absorbent sweatband and a Glaregard underbrim to reduce reflective glare. V-Gard advance caps are not specifically designed to protect against lateral blows from the front, side or rear. MSA's Vanguard protective helmets must be used if lateral protection is desired. For more information, contact your MSA distributor.

Additional Product Information

How to Order From MSA: