V-Gard® Slotted Caps and Non-Slotted Hats meet all applicable requirements for a Type I (top impact) helmet as outlined in ANSI/ISEA Z89.1-2009 (Class E), and also as outlined in CSA Z94.1-2005 (Class E) with 1-Touch® and Fas-Trac® Suspensions.

V-Gard Caps and Hats also meet the ANSI/ISEA Z89.1-2009 voluntary standard for reverse donning.

WARNING: Do not mix suspension and helmet sizes. Make sure the sizes match (i.e., standard-size suspension with standard-size helmet). Use only MSA suspensions on an MSA helmet. Failure to comply with the above will reduce the energy-absorbing ability of the protective helmet, which can result in serious injury or death.

Welding
Construction
Sand Blasting
Agriculture
Asbestos Abatement
Chemical
Domestic Preparedness
Electric Utility
Hazardous Materials
Indoor Air Quality
Medical
Mining
Nuclear
Oil & Gas
Paper & Pulp
Sanding & Grinding
Spray Painting
Water/Wastewater


Confined Space
Electrical Shock
Overhead Falling Objects
Splash
Welding

Product Information

Consist of a polyethylene shell and suspension working together as a protection system. Cap or hat styles, available in three cap sizes, small (6 to 7-1/8 inches), standard (6-1/2 to 8 inches) and large (7-1/2 to 8-1/2 inches) and the hat is 6-1/2 to 8 inches.

Click Here for V-Gard Protective Helmet FAQs (Bulletin No. 0600-43)

Additional Product Information

Technical Information

Ordering Information in PDF Format:

How to Order From MSA: