Thermalgard® Slotted Caps meet all applicable requirements for a Type I (top impact) helmet as outlined in ANSI/ISEA Z89.1-2009 (Class G) and CSA Z94.1-2005 (Class G).
Thermalgard Caps also meet the ANSI/ISEA Z89.1-2009 voluntary standard for reverse donning and low temperature.
WARNING: Do not mix suspension and helmet sizes. Make sure the sizes match (i.e., standard-size suspension with standard-size helmet). Use only MSA suspensions on an MSA helmet. Failure to comply with the above will reduce the energy-absorbing ability of the protective helmet, which can result in serious injury or death.
Applications
Agriculture Asbestos Abatement Chemical Construction Electric Utility Elevated Temperature Hazardous Materials Mining Nuclear Oil & Gas Paper & Pulp Sand Blasting Sanding & Grinding Water/Wastewater Welding
Hazards
Confined Space Electrical Shock Overhead Falling Objects Splash Welding
Product Information
High-strength, smooth crown helmets intended for use where workers may need a helmet with elevated temperature capability. The injection-molded, rivetless shell of glass-reinforced nylon has a beaded edge for improved rigidity. Slots in the cap allow for mounting hearing protection muffs, welding shields and faceshields. Not designed to protect against lateral blows from the front, side or rear. MSA's Vanguard protective helmets are so designed and must be used if lateral protection is desired. For more information, contact your local MSA distributor.
